Aluminum foil jumbo roll , a widely used metallic material, permeates various scenarios in our lives, industry, and medicine. Different types of aluminum foil vary significantly in price due to differences in material, manufacturing process, and application.
Key Price Overview of Three Major Aluminum Foil Categories:
Household Aluminum Foil Paper: The most affordable, primarily sold at retail. Small rolls (10 meters/roll, 30cm wide) retail for approximately $0.085-$9 per unit. Large commercial rolls (by ton) have a reference price of approximately $3800-$5000 per ton. Pricing is primarily based on "convenience" and "basic protection."
Air Conditioning Aluminum Foil: Industrial grade, mainly purchased in bulk. The price is moderate. Standard sizes (0.09-0.2mm thickness, 8011, 3003 alloy) have a reference price of approximately $3000-$4150 per ton. Special hydrophilic coatings and customized sizes can increase prices to $4150-$6900 per ton. Pricing is primarily based on "thermal conductivity" and "corrosion resistance."
Pharmaceutical-grade aluminum foil: This is the most expensive type of product, belonging to high-precision and high-compliance categories. The reference price for standard pharmaceutical PTP aluminum foil is approximately $5800-$7950 per ton, while high-end specialty pharmaceutical aluminum foil (such as that used in biological agents) can exceed $8300 per ton. Retail prices for small-batch customized products can even reach $0.0028-$8.3 per piece. The core pricing factors are "safety," "cleanliness," and "compliance."
Why such a large price difference?
1. Household Aluminum Foil: Household aluminum foil is the most familiar category, mainly used in kitchen baking, grilling, food preservation, and takeout packaging. The core requirements are "safety, convenience, and low cost."
From a product characteristics perspective, household aluminum foil is mostly made of 8011 or 1060 alloy, with a thickness typically between 0.01mm and 0.02mm. The manufacturing process is relatively simple, requiring no complex surface treatment; it only needs to meet food-grade safety standards (no harmful residues, no odor). Large-scale production, mature technology, and small-sized packaging for retail all contribute to lower costs, resulting in the lowest price.
Price is primarily influenced by: thickness (thicker versions are 10%-30% more expensive than standard versions), brand (well-known brands are about 20% more expensive than niche brands), and packaging size (large rolls for commercial use are cheaper, while small rolls for portable use are more expensive).
2. Air Conditioner Aluminum Foil
Aluminium coil in AC is a core component of air conditioner heat exchangers, radiators, and condensers. Its main function is heat conduction. As an industrial consumable, its core requirements are good thermal conductivity, corrosion resistance, and regular shape, directly affecting the cooling/heating efficiency and lifespan of the air conditioner.
In terms of product characteristics, air conditioner aluminum foil is mostly made of 1100, 3003, or 8011 alloys, with a thickness between 0.09mm and 0.2mm. Some products require a hydrophilic coating to improve thermal conductivity and corrosion resistance, preventing condensation and oxidation during use. The production process demands high standards for sheet shape, coating adhesion, and hydrophilicity, and is mostly done in batches to meet custom requirements (width, length, and condition are determined according to customer needs). Minimum order quantities are typically over 3000 kg, resulting in higher costs compared to household foil.
Price is primarily influenced by: alloy material (3003 alloy is $140-$275 more expensive per ton than 1100 alloy), surface treatment (hydrophilic coatings are 15%-25% more expensive than plain foil), purchase volume (larger batches result in lower unit prices), and thickness (thinner foil is more difficult to manufacture and therefore slightly more expensive). For example, 0.13mm thick 8011 H24 hydrophilic aluminum foil for air conditioning costs approximately $3180-$3850 per ton, while custom widths and special conditions can increase the price to $3450-$3980 per ton.
3. Pharmaceutical Aluminum Foil
Pharmaceutical aluminum foil is mainly used for drug packaging (such as blister packaging for capsules and tablets, and drug sealing films). It comes into direct contact with the drug, and the core requirements are "sterility, impurity-free, high barrier properties, and traceability." The compliance threshold is extremely high, making it the most complex and expensive of the three categories.
From a product characteristics perspective, pharmaceutical aluminum foil is mostly made of high-purity 1235 or 8011 alloy, with a thickness between 0.01mm and 0.1mm. Production must be carried out in a cleanroom of Class 100,000 or higher, requiring multiple processes including aseptic treatment, coating modification (to improve barrier properties), and laser pinhole detection.
It must also meet the relevant review and approval requirements of the National Medical Products Administration (NMPA) and international standards such as USP and EP, ensuring no aluminum ion migration, no microbial contamination, and no pinholes (no more than 3 pinholes per square meter with a diameter ≥50μm). Furthermore, high-end pharmaceutical aluminum foil requires full-chain traceability (integrated UDI laser code), and some aluminum foils specifically for biopharmaceuticals require SiOₓ coating to further enhance barrier properties, all of which significantly increase production costs.
Price influencing factors mainly include: compliance qualifications (manufacturers with complete registration qualifications offer higher prices), process complexity (aseptic processing and special coatings increase costs), product precision (higher pinhole rate and cleanliness requirements result in higher prices), and purchase volume (small-batch customization is more than 30% more expensive per unit than large-batch purchases).
For example, the price of regular PTP aluminum foil is approximately $5,800-$6,600 per ton, while high-end pharmaceutical aluminum foil for biopharmaceuticals can reach $7,150-$7,950 per ton. Retail pharmaceutical sealing films can even reach $1.10-$8.30 per piece.