Aluminum 3004 Properties and Its Uses

Al-Mg-Mn alloy grade 3004 is based on the addition of manganese and magnesium to ordinary aluminum. What are aluminum 3004 properties? 3004 aluminum has better tensile strength, yield strength and elongation than ordinary aluminum. Its tensile strength and yield strength have doubled that of ordinary aluminum, and its anti-oxidation and corrosion performance has also been further enhanced.

The “Mg”element of 3004 alloy is much higher than that of 3003 aluminum plate. At the same time, "magnesium element" is also the item with the largest chemical composition difference between 3003 and 3004 aluminum alloy. The tensile strength of 3003 aluminum sheet is 142-178 MPa and that of 3004 aluminum sheet is 150-285 MPa. Through comparison, it is not difficult to find that the performance difference between 3003 aluminum plate and 3004 aluminum plate is still very large. 3004 aluminum has higher strength than 3003 aluminum.

3004 aluminum is often used in the form of 3004 aluminum foil and color coated aluminum sheet. 3004 aluminum foil has high hardness, good load bearing, and better stamping effect than 3003 aluminum foil, so it can be applied to aluminum foil container.

The 3004 alloy is an aluminum alloy with manganese as the main element. It belongs to the aluminum alloy that cannot be strengthened by heat treatment. It has high plasticity, excellent formability, good welding performance, higher strength than the 1-series aluminum alloy, and its corrosion resistance is close to the 1-series aluminum alloy. 3004 food container aluminum foil is with medium strength and good corrosion resistance.

The aluminum honeycomb core material is processed and manufactured by aluminum foil and special honeycomb joint glue on the aluminum honeycomb core production line. Factors affecting the performance of honeycomb core materials mainly include aluminum foil, node glue, and honeycomb core specifications. 3004 aluminum foil is often used for this application. The chosen temper is H18 and H19 temper. The thickness is 0.02-0.06mm.

The 3004 color coated aluminum sheets have the characteristics of high strength, corrosion resistance, and high weather resistance. Aluminum-manganese-magnesium alloy color-coated aluminum sheets have been widely used in the roof enclosure systems of steel structure workshops, exhibition halls, stadiums, airports, railway stations, etc.

The surface of aluminum alloy 3004 is degreased, cleaned, and treated with a passivation layer, and then coated with the most advanced KANAR500 series fluorocarbon (PVDF) resin coating in the world, which has a weather resistance of more than 20 years. Welcome to leave message below to inquire what you need.